[Logo] GDE Forum - Home for the best in diesel powertrain tuning
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics   [Top Downloads] Top Downloads   [Members] Member Listing   [Groups] Back to home page 
[Register] Register /  [Login] Login 
2.8 into a TJ  RSS feed
Forum Index » Product Questions
Author Message
portal-brute

Joined: 03/07/2010 18:55:16
Messages: 3
Offline
Is there any way a KJ ecu can be flashed to be stand alone to work in a TJ or flashed to work in a TJ. Very interested in this swap and hope you guys can help. Also, would a T1 engine be a better candidate for this swap? I am in the process of gathering parts for a AEV brute build and would really like to use this engine for its size/weight compared to most diesel engines available here.
GreenDieselEngineering
[Avatar]

Joined: 10/07/2009 07:25:47
Messages: 361
Location: Southeast Michigan
We can tune the KJ engine ECU to work on a TJ application. The options include setting it up for a manual trans or using the 545RFE automatic trans. With either option we would need to work out some details to properly obtain the vehicle speed information. This is sent via the CAN bus on the KJ and most likely will require some work unless the wheel speed sensors from the KJ are carried over on the TJ. It would be best if you can find a wrecked KJ to swap parts from as this would substantially reduce your costs.
[WWW]
 
Forum Index » Product Questions
Go to:   
Powered by JForum 2.4.1 © 2015 JForum Team • Maintained by Andowson.com