[Logo] GDE Forum - Home for the best in diesel powertrain tuning
  [Search] Search   [Recent Topics] Recent Topics   [Hottest Topics] Hottest Topics   [Top Downloads] Top Downloads   [Members] Member Listing   [Groups] Back to home page 
[Register] Register /  [Login] Login 
Adding high idle to the tune.  RSS feed
Forum Index » HOT Tune
Author Message
flman
[Avatar]

Joined: 28/08/2009 19:59:32
Messages: 74
Offline
Is it possible to program our cruise control to be used for high idle purposes? My old Freightliner with electronic cruise control was able to use the same control to adjust the PTO speed.

Still Burnin Oil since 1992!
2010 John Deere 2305 3 cylinder Yanmar
GDE HOT!! Tuned 2006 CRD LTD Silver, Euro TC, GDE Tuned TCM, B&M Trans drain kit
GDE ECO Tuned 2006 CRD Sport Black, B&M Trans drain kit, Front and rear hooks, Full Skids
GDE ECO Tuned 2005 MB 2500 Sprinter Van
2010 MB 2500 Sprinter Van
GreenDieselEngineering
[Avatar]

Joined: 10/07/2009 07:25:47
Messages: 353
Location: Southeast Michigan
A variable idle speed based on cruise control is not possible on the KJ CRD application. The logic you are referring to is a variant of an all-speed governor unit. To do this on the CRD would require new logic inside the engine controller and massive investment from Bosch to write the code.
[WWW]
flman
[Avatar]

Joined: 28/08/2009 19:59:32
Messages: 74
Offline
Thanks for the reply, I thought it would be nice to have in colder weather to keep the engine temps up, but it sounds like alot of work and money to achieve this.

Still Burnin Oil since 1992!
2010 John Deere 2305 3 cylinder Yanmar
GDE HOT!! Tuned 2006 CRD LTD Silver, Euro TC, GDE Tuned TCM, B&M Trans drain kit
GDE ECO Tuned 2006 CRD Sport Black, B&M Trans drain kit, Front and rear hooks, Full Skids
GDE ECO Tuned 2005 MB 2500 Sprinter Van
2010 MB 2500 Sprinter Van
 
Forum Index » HOT Tune
Go to:   
Powered by JForum 2.4.1 © 2015 JForum Team • Maintained by Andowson.com